Once a long time ago I was asked how one should train.
At the time I was on the spot, as a totally amateur weight-trainer, and quite green so I had no qualifications to answer a question like this. I firmly believe that weightlifting is the one area where you are allowed to strike down someone else's arguments with a simple "but I lift more than you so shut up" (see previous posts).
Back to my original story--I was asked how to train, or more specifically, how one should train their arms. I ended-up mumbling something about performing exercises that train all heads of the biceps and triceps and making sure to perform them on the same day (or some antagonistic bull like that) and in the end I think I actually recommended that he perform Preacher Curls--I know right, ridiculous! I guess that's a good way to show you how green I was...
I have JUST returned to weightlifting after taking a much-needed break. Every once in a while after a stretch of consecutive weight training, it is important to take a week off--even if you don't feel tired yet--even if your weights are continuing to increase. I tend to do this myself after eight to ten weeks of a program. Last week was spent relaxing--catching up on my reading--and refocusing myself so I could really hit the weights HARD upon my return.
The thing is--you NEVER get a second chance--if you dog it on one set, you will never get that set back. There are no do-overs with weightlifting; if you don't attack each set with everything you have, then you may as well stay home--because you're just taking up space.
I live a mile and a half from my gym--and the walk back takes me nearly an hour simply because I'm so spent. On "squat day" I have to drag myself home, legs shaking--and it takes even longer. This is a measure of a good workout in many cases. It SHOULD be hard. It SHOULD be heavy.
In the end there is only one answer to that question, "how should I train?" You should always train with ferocity.
Showing posts with label meathead. Show all posts
Showing posts with label meathead. Show all posts
Wednesday, June 13, 2012
Monday, June 11, 2012
Expertice through Experience
Two weeks ago at MIT's gym (second-worst gym I've ever used) I was performing a Twisting Dumbell
Shoulder Press from a Seated position where the seat-back wasn't
perfectly straight--but rather one notch down--maybe at 100 degrees. The committee is still out on what is the standard way of performing the movement--totally vertical is marked with stimulating more fibers of the shoulder while slightly declined allows fuller contraction at lockout and heavier weights.
Noting the fact that my bench wasn't at the 90 degree setting, some guy at the MIT gym approached me and told me that I would hit the shoulder with more intensity if I were to raise the seat back to 90 degrees. He was not being rude--he was simply trying to offer a tip that seemed to work for him.
He was visibly smaller as a whole with less-developed shoulders as a whole--and since he was doing the same thing on the other side of the gym I made note of his weights--30 pounds. Not bad--for a beginner.
What do you do?
I very nicely told him that I was pressing 95 pounds in each hand and I would gladly listen to him when he reaches my level.
This is not rudeness on my part either--he honestly thought he had something to contribute and experience told me that he didn't. The fact that his tip worked for him doesn't mean that he can instruct someone clearly out of his league--and likewise I would never try to correct someone else's bench press or abdominal work--because frankly I'm average on my best day in these areas.
Even if you are certified as a trainer, there will always be some things that you are just plan unqualified to remark upon--if you've been a bodybuilder your whole life, it just makes no sense to instruct someone in powerlifting. I do not run--I hate running with the heat of 1000 suns. You will NEVER see me instructing anyone on cardiovascular work, so don't even ask.
As a result I would like to add a subheading to my "Three Laws of Weightlifting" in the category of etiquette.
a) Thou Shalt not offer tips in an area where you are not an expert THROUGH EXPERIENCE.
So next time someone helpful wants to correct your method, it is safe to just go ahead and ask them how much weight they use--if they're not at your level you can go ahead and ignore them--tell them Ben said so.
Noting the fact that my bench wasn't at the 90 degree setting, some guy at the MIT gym approached me and told me that I would hit the shoulder with more intensity if I were to raise the seat back to 90 degrees. He was not being rude--he was simply trying to offer a tip that seemed to work for him.
He was visibly smaller as a whole with less-developed shoulders as a whole--and since he was doing the same thing on the other side of the gym I made note of his weights--30 pounds. Not bad--for a beginner.
What do you do?
I very nicely told him that I was pressing 95 pounds in each hand and I would gladly listen to him when he reaches my level.
This is not rudeness on my part either--he honestly thought he had something to contribute and experience told me that he didn't. The fact that his tip worked for him doesn't mean that he can instruct someone clearly out of his league--and likewise I would never try to correct someone else's bench press or abdominal work--because frankly I'm average on my best day in these areas.
Even if you are certified as a trainer, there will always be some things that you are just plan unqualified to remark upon--if you've been a bodybuilder your whole life, it just makes no sense to instruct someone in powerlifting. I do not run--I hate running with the heat of 1000 suns. You will NEVER see me instructing anyone on cardiovascular work, so don't even ask.
As a result I would like to add a subheading to my "Three Laws of Weightlifting" in the category of etiquette.
a) Thou Shalt not offer tips in an area where you are not an expert THROUGH EXPERIENCE.
So next time someone helpful wants to correct your method, it is safe to just go ahead and ask them how much weight they use--if they're not at your level you can go ahead and ignore them--tell them Ben said so.
Thursday, May 17, 2012
Three Undeniable Laws of Weightlifting
I have a few interesting weightlifting-science posts running around my head that I want to get to, but in order to go through with them I need to throw some hardcore science out there least they make little sense.
In weight-training, I like to use a mathematical term called the "inflection point" to describe when the force on one muscle group transfers to a different, typically antagonistic muscle group (this is because the classical definition of an inflection point is that it describes when the slope change in a graphed curve goes from positive to negative or vice-versa).
The way the human form works with respect to musculo-skeletal (DEFINITELY just made that word up) work is that the absolute maximum range of motion for a particular joint cannot exceed 180 degrees of arc. In practice, this arc varies from muscle group to muscle group and averages-out to be something closer to 150 degrees or less. Furthermore, in many cases, this arc-range should be limited for safety reasons--for example, it is both impractical and sometimes dangerous for your knees if you perform a squat from 0 degrees (legs at lockout) down past 100 degrees (10 degrees past parallel).
When choosing exercises, it is typically prudent to choose motions that maximize the amount of strain on a particular muscle group--and given that each repetition can only travel over a certain arc, it is important to optimize the both of these (in most cases) in parallel.
Now the way that force is generated is through gravity, whose direction is always down (even in the case of a stack-and-pin cable which uses pulleys to change the imminent direction of pull). Muscular strain works against gravity in order for force to be generated--and this force is affected by weight (mass) and acceleration, (which is a vector quantity--that is, it is a value that is directionally dependent) F=mA. Given both this AND the factoid that each repetition can ONLY be performed over an arc of 150 degrees, it is obvious that the bulk of your range of motion should be performed such that the force on the muscle is maximized with respect to gravity.
Furthermore, I would like to point out that muscular contraction and force is minimized around the aforementioned inflection points just because force is being transferred rather than focused. There is NEVER a reason to do an exercise that works both the bicep and the tricep at the same time--you're just poorly optimizing the 150 degrees you have available to you.
So, here are my THREE UNDENIABLE LAWS OF WEIGHTLIFTING:
1) Thou shalt never take a set off. (Strength Optimization)
2) Thou shalt perform all repetitions optimized with respect to both force and arc-range. (Range-Of-Motion Optimization)
3) Thou shalt avoid inflection points at all times. (Form Optimization)
In weight-training, I like to use a mathematical term called the "inflection point" to describe when the force on one muscle group transfers to a different, typically antagonistic muscle group (this is because the classical definition of an inflection point is that it describes when the slope change in a graphed curve goes from positive to negative or vice-versa).
The way the human form works with respect to musculo-skeletal (DEFINITELY just made that word up) work is that the absolute maximum range of motion for a particular joint cannot exceed 180 degrees of arc. In practice, this arc varies from muscle group to muscle group and averages-out to be something closer to 150 degrees or less. Furthermore, in many cases, this arc-range should be limited for safety reasons--for example, it is both impractical and sometimes dangerous for your knees if you perform a squat from 0 degrees (legs at lockout) down past 100 degrees (10 degrees past parallel).When choosing exercises, it is typically prudent to choose motions that maximize the amount of strain on a particular muscle group--and given that each repetition can only travel over a certain arc, it is important to optimize the both of these (in most cases) in parallel.
Now the way that force is generated is through gravity, whose direction is always down (even in the case of a stack-and-pin cable which uses pulleys to change the imminent direction of pull). Muscular strain works against gravity in order for force to be generated--and this force is affected by weight (mass) and acceleration, (which is a vector quantity--that is, it is a value that is directionally dependent) F=mA. Given both this AND the factoid that each repetition can ONLY be performed over an arc of 150 degrees, it is obvious that the bulk of your range of motion should be performed such that the force on the muscle is maximized with respect to gravity.
Furthermore, I would like to point out that muscular contraction and force is minimized around the aforementioned inflection points just because force is being transferred rather than focused. There is NEVER a reason to do an exercise that works both the bicep and the tricep at the same time--you're just poorly optimizing the 150 degrees you have available to you.
So, here are my THREE UNDENIABLE LAWS OF WEIGHTLIFTING:
1) Thou shalt never take a set off. (Strength Optimization)
2) Thou shalt perform all repetitions optimized with respect to both force and arc-range. (Range-Of-Motion Optimization)
3) Thou shalt avoid inflection points at all times. (Form Optimization)
Saturday, May 5, 2012
Meathead Post #1
I recently finished week 4 of AST's MAX-OT weightlifting program, so its time for me to be a meathead and to evaluate my progress and change the regimen. I have done this program before--in late 2010, and since I am a packrat who never throws out his workout logs, I can compare my progress across the years. For once my destructive habits are useful! YAY!
As it were, it looks like I am stronger in every muscle group across all exercises EXCEPT THE BICEPS. For these it looks like I'm more-or-less the same. EDIT: Just ran the calculation, I've had a 1.6% increase.
So overall this is a pretty exciting time--I didn't break my Deadlift Personal Record on this cycle (405 lbs. for 8 reps), but I was able to experiment a little between styles. I typically perform them Sumo-style, but tried classic deadlifts this time. These both target the same muscle groups--hamstrings, quads, erector spinae--the difference is that with the regular deadlift, the sticking point (the most difficult part of the exercise--where the repetition is most often failed) is about 3-4 inches above the ground, and with sumo-style 'lifts, it is on the ground. For shorter people--like myself--this sticking point is incredibly small, so naturally the sumo deadlift is my method of choice--but it was good to go outside of my comfort zone this cycle.
It looks like in the upcoming cycle I'll be doing a lot of pullups...also I should use this opportunity to reassess strict form on my Bent-Over Rows--which have been sloppy recently. I'll have to find an alternative to the Seated Military Press since THERE IS NO WAY TO PERFORM A SEATED BARBELL PRESS AT MIT'S GYM. Which is totally ridiculous to me to be blunt.
---------------------
Also remember that since it is the first Saturday in May, today is Free Comic Book Day for participating stores.
As it were, it looks like I am stronger in every muscle group across all exercises EXCEPT THE BICEPS. For these it looks like I'm more-or-less the same. EDIT: Just ran the calculation, I've had a 1.6% increase.
So overall this is a pretty exciting time--I didn't break my Deadlift Personal Record on this cycle (405 lbs. for 8 reps), but I was able to experiment a little between styles. I typically perform them Sumo-style, but tried classic deadlifts this time. These both target the same muscle groups--hamstrings, quads, erector spinae--the difference is that with the regular deadlift, the sticking point (the most difficult part of the exercise--where the repetition is most often failed) is about 3-4 inches above the ground, and with sumo-style 'lifts, it is on the ground. For shorter people--like myself--this sticking point is incredibly small, so naturally the sumo deadlift is my method of choice--but it was good to go outside of my comfort zone this cycle.
It looks like in the upcoming cycle I'll be doing a lot of pullups...also I should use this opportunity to reassess strict form on my Bent-Over Rows--which have been sloppy recently. I'll have to find an alternative to the Seated Military Press since THERE IS NO WAY TO PERFORM A SEATED BARBELL PRESS AT MIT'S GYM. Which is totally ridiculous to me to be blunt.
---------------------
Also remember that since it is the first Saturday in May, today is Free Comic Book Day for participating stores.
Subscribe to:
Posts (Atom)